The crystal leaf art paint has a sparkling stone effect, with the light of pearls and the texture of silk, thixotropic at different angles and under different light, and flashes with light and dark changes. Beneath the silky-smooth surface is rich texture, gorgeous without diminishing connotation, dazzling yet elegant. Widely used in high-end villas, large exhibition halls, 5A office buildings, private clubs, restaurants, entertainment venues (KTV, etc.).
Features:
1. Gorgeous and noble, suitable for all substrates, with super waterproof function.
2. The product is non-toxic and environmentally friendly, and it helps to adjust humidity changes, so that the wall has good air permeability and waterproofness.
3. The high PH value of the raw materials of the product makes it have an excellent sterilization and disinfection effect. It also has a fireproof effect while sterilizing and disinfecting. It can be said that it is one of the most durable coatings.
4. It is resistant to scrubbing, yellowing, stain resistance and weather resistance, and is easy to maintain.
5. Create a variety of textures and texture effects, with strong three-dimensional sense and natural texture.
Construction technology:
1. Basic treatment, firstly apply the special fixing agent for crystal leaves -- over and over, apply a thin layer of the base color of the glitter stone evenly on the entire surface with a stainless steel batch knife with a scraping method and firm pressure, and wait. After the product is completely dry, it will take about 1 hour, depending on the weather temperature.
Second, the treatment of the texture layer, pour some base colors into the paint tray, wet the sponge roller and wring out the excess water, gently dip the base color with the roller, and roll freely on the surface in all directions. Cover about 75% of the entire surface.
3. Surface treatment, use different colors or light tones during surface construction. More changes in color or tone will have a more vivid effect. Use a trowel to apply the product to the texture layer with firm pressure and move towards yourself. The direction of the arc forms a compact movement, about 8 in length, the part with the burrs, use the glittering stone sponge small roller to roll the glittering stone, so that the rigid edges and corners are not obvious. This method can avoid unnatural circle marks and edges caused by overlapping application of the product. Repeat the operation until the surface layer is completed. Around the narrow door frame, use a small spatula to shovel off the excess glitter stone, smooth it out, and dry it about 1-2 hours or so.
