Texture is an important visual element for presenting the texture of an object, shaping and rendering the form.
In many cases, it is used as a means of processing the material of the designed object to reflect the quality of the designed object and the style of the material, and as a specific style accepted by people and a fashion factor. The concept of texture, as a positioning method for the observation of natural objects, will strengthen the understanding of the substrate of the object. It induces people to experience and touch it with heart and mind, and the object and vision have a sense of intimacy and visual connection. pleasure. When we observe texture, it is helpful to recognize the form, understand, express and recreate it, and it is helpful to deeply understand the meaning and function of formal language.
,Construction requirements of texture paint]
1. When the concrete or plastering base is painted with water-based paint, the moisture content shall not exceed 10%; the moisture content of the wood base shall not exceed 12%.
2. The ambient temperature of the construction site should be between 5~35"C, and attention should be paid to ventilation and dust prevention.
1. The treatment of texture paint base layer should meet the following requirements:
1. Concrete and cement mortar plastering base: it should be fully scraped with putty and polished with sandpaper, the surface should be smooth and smooth, and the lines and angles should be straight.
2. Gypsum board base layer: After the board seams and nail holes should be treated according to the design requirements, putty should be fully scraped and sandpaper polished.
3. Wooden base layer: the surface should be smooth and smooth, the color should be consistent, and the surface should be free from pollution, cracks, incomplete and other defects.
2. General method of texture paint finishing construction:
1. Roller coating method: first move the wool roller dipped in the paint liquid to move the paint roughly on the base layer, and then use the wool roller not dipped in the paint liquid to stick to the base layer up and down, left and right to roll back and forth, so that the paint liquid is in the base layer. Spread it evenly on the base layer, and finally roll it in a certain direction with a hair roller dipped in the paint liquid. The inner corners and the upper and lower openings should be aligned with a row of brushes.
2. Spraying method: The pressure of the spray gun should be controlled within the range of 0.4~0.8MPa. When spraying, the spray gun and the wall should be kept vertical, the distance should be about 500mm, and the uniform speed should be moved in parallel. The overlapping width of the two lines should be controlled at 1/3 of the spraying width.
3. Brushing method: proceed in the order of first left, then right, first up and then down, first difficult then easy, first side and back.
3. Texture paint and wood base layer with varnish:
For the essential base layer, the knots and turpentine parts should be sealed with shellac paint, and the nail holes should be filled with water-based putty. Before scraping the putty and coloring, you should paint the sealing primer once, and then repeat the color matching and color correction of the local area. After each repair, brush the middle layer paint once, dry and polish it until the color tone is uniform, and then do decoration. topcoat.
Fourth, the crystal leaf texture series is divided into: texture film, texture cream, texture cloth texture construction, please refer to the construction manual or construction video.
