Ceramic spar art paint is usually used for the decoration of interior walls of noble residences, country villas, hotels, office buildings and other places. Ceramic spar's super color retention, crack resistance, moisture resistance, environmental protection and other characteristics have become the mainstay of the new generation of artistic coatings in the market! The sintered colored sand process used in terracotta spar is an epoch-making architectural coating process aesthetics that breaks through the traditional color and pink paste. High temperature sintered color sand is a new generation of wall color sand type ecological texture paint wall material composed of special high-quality emulsion and additives!
Introduction to the construction steps of ceramic spar
1. Base surface treatment
Before construction, make sure that the base surface is free of grease, dust and any other pollutants that can affect the bonding strength of the putty, and check whether the base surface has hollows, cracks, whether the wall is loose, powder falling, etc.
2. Construction method of base layer sealing primer
(1) Construction tools - rollers
(2) Preparation before rolling: (Remove foreign bodies on the base layer, and the deodorant sealant can be applied without adding water.)
(3) Procedure and requirements: Use a wool roller to evenly roll and brush the deodorant sealant with a cross-rolling method.
(4) Use a wool roller to roll the clean texture film evenly once or twice.
3. Construction method of ceramic spar coating
Directly use the plastering knife to carry out the construction for the first time before the second batch of scraping can be carried out to ensure that it is smooth after drying. Note: Each wall must be completed at one time to avoid creating interfaces. The construction process of terracotta spar is much simpler than that of art paint. Generally, the scraping master can easily get started after learning certain skills.
