Crystal Leaf Interface King is a one-component water-based emulsion that can greatly improve its bonding strength after mixing with cement sand, and can be used for concrete interface treatment.
Features
1. This product introduces advanced technology, adopts high-efficiency and environmentally friendly raw materials, and has super adhesion, excellent water resistance and aging resistance.
2. It is suitable for the basic interface treatment before scraping putty or plastering on brick-concrete walls such as fair-faced bricks, cement and mortar. Application of this product to old paint must be determined experimentally.
3. This product is rolled and brushed on the surface of the loose base layer, which can improve the phenomenon of looseness and powder drop to varying degrees (depending on the actual condition of the base surface) through penetration and bonding.
4. It has the effect of sealing and alkali resistance, reducing the yellowing of latex paint and increasing the adhesion between paint and putty.
Construction method
1. The surface of the base layer must be firm, smooth, free from floating ash, oil, paint and other loose animals such as floating ash. For the base layer with strong water absorption, it should be properly moistened with alcohol.
2. Please stir evenly before use, apply the slurry to the base layer with a roller or a brush, do not miss the brush, and then fully dry (about 12 hours)
3. After the slurry is completely dry and the base surface is confirmed to be completely closed, the next process can be carried out.
Implement the standard JC/T907-2018 "Concrete Interface Treatment Agent"
Precautions
1. The construction temperature shall not be lower than 5C and shall not be higher than 35C.
2. On tile surface renovation, or other smooth-surfaced substrates, the smooth-surfaced substrates should be processed into pits with tools to increase adhesion.
3. There should be no floating dust on the substrate, oil stains and loose residues should be removed, otherwise the construction cannot be performed.
Shelf life
The sealed products in barrels are stored on ventilated and dry shelves. Under normal storage (not lower than 0C) transportation conditions, the shelf life is one year.
Storage conditions
◆Store in a closed container, in a cool, ventilated and dry warehouse, prevent direct sunlight, and the storage environment temperature should be kept between 0-35C.
◆Precipitation during storage is a normal phenomenon. Stir well before use. .
statement
When the use of this product is beyond the control of the manufacturer, the company shall not be liable for any damages caused by incorrect use. The construction should be carried out in accordance with the scope of the manual. For any questions, please consult the local distribution point or the company's technical service personnel. .
