Sand-fixing agent is an environmentally friendly one-component water-based emulsion. The secondary reaction forms a reinforcing adhesive with strong sealing and curing properties. It can be applied to the base surface with low strength to achieve the effect of penetration, strengthen the base layer, and improve the base layer. hardness. The film has enhanced resistance to temperature change, shrinkage and aging, and does not affect the strength of this product due to thermal expansion and contraction and temperature changes. Under normal temperature, the table is dry for 4 hours, and the table is dry for 24 hours; the table is dry for 8 hours at low temperature, and the table is dry for 48 hours (the above drying time is only the theoretical data of the experimental environment. In the actual environment, the drying time will be delayed due to low temperature or high humidity , wait until the film is completely dry before proceeding to the next process.)
Features
◆Infiltration curing
◆Enhanced hardness
◆Prevent sand formation
◆Green environmental protection
Construction method
1. When using, stir it slightly with tools to make it uniform. It can be applied by roller and roller, and can be applied by brush in places with high quality requirements.
2. If the surface of the product is brushed and then the bottom is peeled off, the product can be brushed - once.
3. If wallpaper is pasted on the surface after painting this product, this product should be painted twice, no need to add any diluted liquid during construction, and the construction environment should be dry and ventilated. (Approximately 8~10mr of brushing per kilogram of theoretical area)
Scope of application
1. The base wall is not firmly bonded.
2. Sand off the wall.
3. The ground returns to sand.
4. The strength of cement mortar is low.
5. The putty layer peels off the powder.
6. The cement grade is low.
Precautions
1. This product is strictly forbidden to be swallowed. If it comes into contact with the eyes or sensitive parts of the body, it should be washed with water immediately.
Get medical attention immediately.
2. The storage place of this product should be ventilated, dark and dry, and the room temperature should be 5~35C.
3. This product is strictly prohibited to be used with water or other diluted liquids.
4. If the surface of the base layer used has peeling, pine, hollow or loose base surface 2
If there are any phenomena such as decorative paint, please dispose of the surface layer before painting the product, otherwise there may be a chance of biting.
bottom phenomenon.
5. Before construction, make sure that the product is within the warranty period. If the product expires, it is strictly prohibited to use.
Shelf life
The sealed products in barrels are stored on ventilated and dry shelves. Under normal storage (not lower than 0C) transportation conditions, the shelf life is one year.
Storage conditions
The sand-fixing agent is packed in plastic barrels. The effective storage period is 6 months from the date of production. It should be stored in a cool, dry and ventilated warehouse, not exposed to sunlight, not rained, and should be protected from freezing in winter.
statement
When the use of this product is beyond the control of the manufacturer, the company shall not be liable for any damages caused by incorrect use. The construction should be carried out in accordance with the scope of the manual. For any questions, please consult the local distribution point or the company's technical service personnel.
